Results 1 to 3 of 3

Thread: Doser 2.1 slave fail during soft upgrade

  1. #1
    Join Date
    30.05.2011
    Posts
    60

    Default Doser 2.1 slave fail during soft upgrade

    Hi my slave 2.1 fail to be recognised after unsuccessful software upgrade, is there any way to restore it ?

  2. #2
    Join Date
    27.05.2015
    Posts
    2,358

    Default

    Hello,

    Yes you can recover your doser.

    Since this is a slave D2.1, you will have to connect to your primary device and follow the "Emergency PAB-device update" steps as shown here:
    https://www.aquariumcomputer.com/kno...r-pab-devices/

    Make sure you disconnect ALL PAB devices, except the doser which will be receiving the update. That doser should remain connected directly to your primary device. Do not overlook this step.
    No support or warranty issues over PM!
    Please send PMs to the moderators only if you have general problems with using the forum! Thanks for helping us to keep the support efficient.

    Creating a support ticket
    For support or warranty issues, create a support ticket by clicking here.

  3. #3
    Join Date
    30.05.2011
    Posts
    60

    Default

    Thanks Vinny, it sorted

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •