Results 1 to 6 of 6

Thread: rubber seal PH probe

  1. #1
    Join Date
    28.04.2022
    Posts
    31

    Default rubber seal PH probe

    I installed my new KHD director with SA doser 2.1, 4 days ago.
    It is up and running ok, no leaks.

    But i'm not sure of the next part :

    4.12 Mounting the pH-Electrode
    After successful calibration, the pH-Electrode can be
    installed. To do this loosen the locking nut on the side of
    the KH Director and push the electrode into the device or
    rather into the measurement cell until it stops. Then turn
    the locking nut tight again.
    Make sure that the rubber seal is seated correctly and
    that the screw connection cannot be loosened, and
    ensure that no water can escape.
    Tighten the screw connection as tightly as possible to
    prevent water from leaking out of the electrode, use an appropriate tool!
    TIP
    To keep the rubber seal smooth and dense, we recommend rubbing it with
    Vaseline thinly from time to time.


    At first sight, i don't see this rubber ring?

    I have searched on the internet for photo's or a youtube clip where i can see this rubber seal, but didn't find one.

    In text, i can't make out if the rubber seal is present and that i'm looking at the wrong place or if i installed the PH probe without the rubber seal.
    But then i presume there would be a leakage?
    I don't wanna ruin my KHD.

    thanks for the info

    regards, Nico

  2. #2
    Join Date
    03.04.2010
    Posts
    39

    Default

    Hallo schau mal,einfach mal ne neue bestellen,dann bist Du auf Nummer sicher.https://www.shop-meeresaquaristik.de...43::21544.html

  3. #3
    Join Date
    28.04.2022
    Posts
    31

    Default

    My German is very bad, so i reply in english .

    Where should the rubber seal be located in the photo?

    I thought where i colored, but i'm probably wrong.

    Koppeling PH probe seal.jpg

  4. #4
    Join Date
    03.04.2010
    Posts
    39

    Default

    Nein,die sitzt oben in der Mutter

  5. #5
    Join Date
    28.04.2022
    Posts
    31

    Default

    Quote Originally Posted by Jamali View Post
    Nein,die sitzt oben in der Mutter
    Then it's probably there, i have no leaks.
    I was looking at the wrong place then .

    Thank you for the info

  6. #6
    Join Date
    03.04.2010
    Posts
    39

    Default

    Wenn Du keine Lecks hast,ist doch alles bestens

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •