Results 1 to 4 of 4

Thread: Powerbars?

  1. #1
    Join Date
    31.12.2019
    Posts
    56

    Default Powerbars?

    I just got the powerbar STDL4-4 and currently have powerbar 5.1 to Profilux. Once I connect the STDL the switch channels on powerbar 5.1 change to 5-9 from 1-4? So do I have to reprogram these? I didn't connect it just want to make sure when I do what happens.

  2. #2
    Join Date
    31.12.2019
    Posts
    56

    Default

    Ok, I connected the STDL4-4 and lights on for S1, S2 and S3 but S4 not lit. I also dont see it in the Profilux. What am I doing wrong?

  3. #3
    Join Date
    12.04.2015
    Posts
    338

    Default

    You will Not See the stdl4-4 in the profilux. IT is a one way communication. You have to Set the s Port tobanalog Mode.

  4. #4
    Join Date
    27.05.2015
    Posts
    2,426

    Default

    Instructions for setting up the STDL4-4 on a ProfiLux can be found here:
    https://www.aquariumcomputer.com/kno...r-on-profilux/
    No support or warranty issues over PM!
    Please send PMs to the moderators only if you have general problems with using the forum! Thanks for helping us to keep the support efficient.

    Creating a support ticket
    For support or warranty issues, create a support ticket by clicking here.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •