Results 1 to 3 of 3

Thread: program level sensor to turn on doser

  1. #1
    Join Date
    21.05.2019
    Posts
    30

    Default program level sensor to turn on doser

    Hi, I have a profilux 4,optical sensor, doser 2.1, and a power bar. I'm using the optical sensor as high level sensor for my RODI container. I would like to dose an additive every time the RODI storage container has been refilled. So basically, everytime the optical sensor detects water, I would like to trigger the doser to dose an additive and maybe also a wavemaker connected to power bar to turn on and mix the additive for 5 minutes. How can I program this ? Is this even possible ? thanks in advance

  2. #2
    Join Date
    12.04.2015
    Posts
    318

    Default

    Das geht mit der progamierbaren Logic
    Du kannst eine Steckdose auf die Programmierbare Logik setzen. Diese stellst du auf die Funktion Pulse x Sekunden. In die Steckdose kommt die Umwälzpumpe.
    Den Dosierkanal mit dem Aditiv stellst du auf: Reagiert auf Schaltkanal der Steckdose

  3. #3
    Join Date
    21.11.2021
    Posts
    2

    Default

    You can setup a virtual switch to trigger your doser head. That virtual switch is then attached to programmable logic which reacts to your float or optical sensor.

    SC-7.JPG
    SC-7b.JPG
    PL-1.JPG

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •