Results 1 to 3 of 3

Thread: Two heaters and two aquarium whit 1 profilux

  1. #1
    Join Date
    11.02.2021
    Posts
    4

    Default Two heaters and two aquarium whit 1 profilux

    Hello,

    Is it possible to control 2 heaters on 2 different aquariums with the same temperature with both a heating sensor, to control on a profilux 3.1

  2. #2
    Join Date
    27.05.2015
    Posts
    2,426

    Default

    Yes, it's possible.


    If you want both heaters to have the exact control conditions, you can connect each heater to different PB sockets and assign the same temperature control function to each socket. If you would like to have two separate control conditions (different desired temp, etc.), you can create a virtual probe and assign that probe to the second heater.

    Another option would be to install a 2nd temperature sensor so it is dedicated to the 2nd aquarium. You then assign the 2nd heater to react according to the settings you set for the 2nd temperature probe.
    No support or warranty issues over PM!
    Please send PMs to the moderators only if you have general problems with using the forum! Thanks for helping us to keep the support efficient.

    Creating a support ticket
    For support or warranty issues, create a support ticket by clicking here.

  3. #3
    Join Date
    13.05.2021
    Posts
    14

    Default

    Hallo Colin,
    my Profilux 4 is working that way:
    - two Aqarium with a temperature sensor in each of them
    - an additional card in the Profilux to support the additional temperature sensor
    - each of the Aqarium could now have another temperature
    Works very well since around 6 month.

    Regards

    Werner

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •