Results 1 to 3 of 3

Thread: GHL Programmable Logic Check

  1. #1
    Join Date
    29.06.2020
    Posts
    24

    Default GHL Programmable Logic Check

    Building on the GHL example of a delay on after maintenance mode trying to get this to work for 2 maintenance modes and 2 feed/filter modes. The delay times are not what will be actually used just easy times for me to tell apart when testing on empty outlet with a light plugged in.

    The GHL example used Delayed off then inverted it at the next gate. How is that different from using Delayed On and not inverting it?

    Does this logic look correct?

    GHL3.PNG

  2. #2
    Join Date
    29.06.2020
    Posts
    24

    Default

    Got it to work had to switch the feed/filter to delayed on and remove the invert function.

    I do not understand why though.

    GHL4.PNG
    Last edited by Skydivingcatfan; 23.09.2021 at 12:29.

  3. #3
    Join Date
    29.06.2020
    Posts
    24

    Default

    Think I figured out why
    Filter not activated = 1
    Maintenance not activated = 0
    I did not see that in the manual

    Edited to add

    I should have read the manual closer
    Last edited by Skydivingcatfan; 26.09.2021 at 12:48.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •