Results 1 to 2 of 2

Thread: Profilux 4 wifi issue

  1. #1
    Join Date
    19.07.2021
    Posts
    2

    Default Profilux 4 wifi issue

    Hi all,

    I have a new Profilux 4, I can connect to the device via its hotspot and see sensor readings on my phone. I updated the firmware to 7.25 today.

    But I can't connect to it via my Wifi network. Led next to Wifi (middle LED) is green.

    I also cannot add the device to myGHL.

    Can some support person from GHL help me? It has been rather frustrating to get this to work.

    [B]Some details about network:
    current ip address: 192.168.1.10
    Wifi firmware version: 7088
    Mode: 802.11 b/g/n/
    Client network settings:
    - encryption: WPA WPA2 PSK
    Obtain IP address automatically

    Access point settings:
    Encryption: WPA WPA2 PSK
    Wireless channel: 6
    IP address: 192.168.1.10

  2. #2
    Join Date
    09.11.2017
    Posts
    1,476

    Default

    Please open a support ticket and add screenshots of the network settings and WiFi module state: https://www.aquariumcomputer.com/sup...ets-enquiries/
    No support or warranty issues over PM! Please send PMs to the moderators only if you have general problems with using the forum! Thanks for helping us to keep the support efficient.
    Kein Support oder Reklamationsabwicklung über PM! Bitte senden Sie an die Moderatoren nur PMs bei allgemeinen Problemen mit der Verwendung des Forums! Danke dass Sie uns dabei helfen, den Support effektiv zu gestalten.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •