Results 1 to 3 of 3

Thread: Ato

  1. #1
    Join Date
    17.08.2020
    Posts
    21

    Default Ato

    I run my ato pump on a timer, my evaporation is consistent but my sump level drops as my filter socks plug up so I don't use the ato function, I want to shut the timer socket off if the sump high switch is on.
    I can do this with Apex but can't seem to do this with my P4.
    Can P4 do this?

  2. #2
    Join Date
    17.08.2020
    Posts
    21

    Default

    Figured it out, programmable logic

  3. #3
    Join Date
    14.11.2017
    Posts
    28

    Default

    Yes, you can.
    Install a level switch in the sump.
    assign this level switch to Leakage Detect.
    assign this related Fill Water to the socket outlet where a timer is installed.
    Or,
    You install the a level switch in your return pump compartment.
    And assign this level switch to ATO in level control.
    Then assign this ATO function to the socket outlet and connect the ATO feed pump to this outlet w/o timer.
    Hope this help.
    Son

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •