Page 1 of 2 12 LastLast
Results 1 to 10 of 20

Thread: Mitra 7206 will not start up

  1. #1
    Join Date
    29.06.2020
    Posts
    24

    Default Mitra 7206 will not start up

    Unplugged my lights and now one of them will not start up the other took about 10 minutes to boot up. The GHL logo flashes every 3 seconds.

    Last edited by Skydivingcatfan; 17.06.2021 at 00:33. Reason: Can not get video to work

  2. #2
    Join Date
    27.05.2015
    Posts
    2,488

    Default

    Case being handled via support ticket system.
    No support or warranty issues over PM!
    Please send PMs to the moderators only if you have general problems with using the forum! Thanks for helping us to keep the support efficient.

    Creating a support ticket
    For support or warranty issues, create a support ticket by clicking here.

  3. #3
    Join Date
    19.11.2022
    Posts
    6

    Default

    I have exactly the some problem!
    I had an old ticket for this problem but got no solution so I made a new on yesterday.
    I would be grateful if you could write me your solution!!!
    Thank you!

  4. #4
    Join Date
    29.06.2020
    Posts
    24

    Default

    Unplug the connector between the power supply and the light.

  5. #5
    Join Date
    19.11.2022
    Posts
    6

    Default

    Yes! But after electricity power off and if I am away from home reef will stay at darkness!

  6. #6
    Join Date
    29.06.2020
    Posts
    24

    Default

    Quote Originally Posted by CarpeDiemIris View Post
    Yes! But after electricity power off and if I am away from home reef will stay at darkness!

    The only time I have had it happen is when I unplug the light and that has only happened to one light a couple times.

  7. #7
    Join Date
    19.11.2022
    Posts
    6

    Default

    Quote Originally Posted by Skydivingcatfan View Post
    The only time I have had it happen is when I unplug the light and that has only happened to one light a couple times.
    All th three of mine do not start up after electricity is off....

  8. #8
    Join Date
    28.11.2020
    Posts
    7

    Default

    Was there any fix for this issue, besides using the circular connector? My LX 7206 also have this problem. More often than not they don't turn back on when I unplug them from the wall. I was away on vacation for 2 weeks and some of the lights didn't turn back on after a power outage.

  9. #9
    Join Date
    10.10.2013
    Posts
    994

    Default

    Hello,

    If it's a issue that happens frequently, I can suggest you add a time delay relay. (Personal advice, not an official GHL advice).

    Gaël
    No support or warranty issues over PM!
    Please send PMs to the moderators only if you have general problems with using the forum! Thanks for helping us to keep the support efficient.

    Creating a support ticket
    For support or warranty issues, create a support ticket by clicking here.

  10. #10
    Join Date
    28.11.2020
    Posts
    7

    Default

    Quote Originally Posted by Gael View Post
    Hello,

    If it's a issue that happens frequently, I can suggest you add a time delay relay. (Personal advice, not an official GHL advice).

    Gaël

    Thanks for the suggestion. Do you mean on the circular connector side? I would be willing to do that providing I can find the mating circular connectors to wire out to the relay. Or do you mean for the wall power? In that case, I should just get another powerbar to plug them into. Then I could manually power cycle them in GHL Connect until it powers up properly.

    I was hoping GHL would be able to implement something like an automatic reboot when the Mitras goes into that state where the GHL logo is blinking blue after powering up. But this is wishful thinking, I don't know what is causing the issue or what's possible in that error state.

    The power outages aren't frequent. Just so happened that one occurred a few weeks ago and that was the second day into my vacation.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •