Results 1 to 4 of 4

Thread: Heater?

  1. #1
    Join Date
    31.12.2019
    Posts
    70

    Default Heater?

    I have a Fluval E Heater and trying to control it through GHL. It seems not able to control the heater. I have GHL set at 78 degrees Fahrenheit and GHL temp probe reading 76.7; Heater reading 76.5.

  2. #2
    Join Date
    27.05.2015
    Posts
    2,488

    Default

    Check your settings, make sure the temperature probe settings are correct. The steps for setting up heater control can be found here:
    https://www.aquariumcomputer.com/kno...eater-control/

    If your hysteresis is not set correctly, it will not trigger ON the heater when it needs to.

  3. #3
    Join Date
    31.12.2019
    Posts
    70

    Default

    I did that and seems that heater is always on and temp never changes. I may disconnect from GHL and try it without control to see if it's heater. Are all heaters compatible though?

  4. #4
    Join Date
    27.05.2015
    Posts
    2,488

    Default

    Any heater is compatible. If it has a built-in thermostat, you need to have that properly set so it does not turn OFF the heater before the ProfiLux tells it to turn OFF.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •