Zeige Ergebnis 1 bis 4 von 4

Thema: Connecting Doser to Pro 3.1?

  1. #1
    Registriert seit
    17.11.2020
    Beiträge
    13

    Standard Connecting Doser to Pro 3.1?

    Hi

    Just got a second hand setup, and trying to figure out how to run this thing.

    As I understand I need to add the doser under the system settings->assign device. However nothing shows up on the list (This was possible with the powerbar).

    Plugged the doser to the S1-S4 plug as shown below:

    20201117_210003.jpg

    Am I'm missing something, or possible faulty cable, unit etc?

  2. #2
    Registriert seit
    27.05.2015
    Beiträge
    2.155

    Standard

    Hi,

    This doser is not showing up because it is not a PAB device. Legacy dosers are setup differently.

    1. Go to the Switch channels settings page

    2. Enable digital communication for S1-S4, save settings
    Digital S port enable.PNG

    3. Click Program digital powerbar or dosing pump unit

    4. Select Numbering of dosing pump station, click NEXT
    Gen 1 doser setup 1.PNG

    5. Select the starting number for this dosing pump.
    NOTE:If you have a powerbar already controlling sockets 1-6, set the doser to begin at socket #7

    6. Press Program now. The pump will now be assigned to switch channels (socket) 7-10.

    7. Select socket 7 and set the function to Dosing pump 1

    8. Select socket 8 and set the function to Dosing pump 2

    9. Follow the same order for pumps 3 and 4.

    10. You can now create your dosing schedules.

    Via app / myGHL
    https://www.aquariumcomputer.com/kno...pump-schedule/

    Via GCC

  3. #3
    Registriert seit
    17.11.2020
    Beiträge
    13

    Standard

    Thanks for the info Vinny

    Zitat Zitat von Vinny Beitrag anzeigen
    Hi,

    This doser is not showing up because it is not a PAB device. Legacy dosers are setup differently.

    I figured this one out late last night.

    I followed your directions, but still have no control of the dosing pump. Currently I have nothing else connected to the Profilux, just trying to get this working.
    Should the yellow LED on the doser light up once there's a connection?
    Once setup per your guide, Shouldn't I be able to use the 'manual pump' mode from the GCC to run the pumps?

    As first step, I just want to make sure there's a connection to the doser and I can do simple controls - afterwards, I can mess with programming/scheduling.

  4. #4
    Registriert seit
    17.11.2020
    Beiträge
    13

    Standard

    UPDATE:
    It seems the RJ12 cable had some corrotion at one of the plugs.
    Changed the plug, and everything is working flawlessly.

    Sorry, for wasting your time (although I did need the info on enabling the digital communication).

    Thanks for the help!

Forumregeln

  • Es ist dir nicht erlaubt, neue Themen zu verfassen.
  • Es ist dir nicht erlaubt, auf Beiträge zu antworten.
  • Es ist dir nicht erlaubt, Anhänge hochzuladen.
  • Es ist dir nicht erlaubt, deine Beiträge zu bearbeiten.
  •