Zeige Ergebnis 1 bis 5 von 5

Thema: Stream pump control

  1. #1
    Registriert seit
    16.06.2020
    Ort
    Kidderminster
    Beiträge
    3

    Frage Stream pump control

    Hi,

    I have two stream pumps in my tank, switch channel 1 & 2.

    I would like to program them to alternate whilst on, Stream pump group 1 (got them alternating etc)

    I’d like to have them come on and off at certain times during the day..... (timer 3)

    I therefore have 3 “zones” that need programming.
    1) Switch channel (1&2)
    2) Stream Pump Group 1
    3) Timer 3

    I cannot find out how to programme this, please help.......!

    Chris

  2. #2
    Registriert seit
    27.05.2015
    Beiträge
    2.157

    Standard

    Chris,

    Are these pumps being controlled via the physical sockets on the powerbar or 1-10v?

  3. #3
    Registriert seit
    16.06.2020
    Ort
    Kidderminster
    Beiträge
    3

    Standard

    Zitat Zitat von Vinny Beitrag anzeigen
    Chris,

    Are these pumps being controlled via the physical sockets on the powerbar or 1-10v?
    Hi Vinny,

    Just using switch sockets not 1-10v.

    Regards

    Chris

  4. #4
    Registriert seit
    27.05.2015
    Beiträge
    2.157

    Standard

    If you want both pumps to react to the same TIMER, give this a try:

    1. Create your timer function

    You will now create a Programmable Logic function which combines the TIMER function and the settings for the first stream pump...
    1. Go to the Programmable Logic settings page and select an unused gate
    2. Set the function to AND
    3. Set Input 1 to Stream pump (select first pump)
    4. Set Input 1 to Timer (select timer number)
    5. Save settings

    You will now create a Programmable Logic function which combines the TIMER function and the settings for the second pump...
    1. Go to the Programmable Logic settings page and select an unused gate
    2. Set the function to AND
    3. Set Input 1 to Stream pump (select second pump)
    4. Set Input 1 to Timer (select same timer number)
    5. Save settings

    You will now assign these PL functions to their respective outlets...
    1. Go to the Switch channels settings page and select the outlet powering your first pump
    2. Assign it to the function, Programmable Logic (choose the gate belonging to the 1st pump)
    3. Type-in description
    4. Select the outlet powering your second pump
    5. Assign it to the function, Programmable Logic (choose the gate belonging to the 2nd pump)
    6. Save settings

  5. #5
    Registriert seit
    16.06.2020
    Ort
    Kidderminster
    Beiträge
    3

    Standard

    hey Vinny, this has worked.... thanks a million! First class help!!

Forumregeln

  • Es ist dir nicht erlaubt, neue Themen zu verfassen.
  • Es ist dir nicht erlaubt, auf Beiträge zu antworten.
  • Es ist dir nicht erlaubt, Anhänge hochzuladen.
  • Es ist dir nicht erlaubt, deine Beiträge zu bearbeiten.
  •