Results 1 to 5 of 5

Thread: Stream pump control

  1. #1
    Join Date
    16.06.2020
    Location
    Kidderminster
    Posts
    3

    Frage Stream pump control

    Hi,

    I have two stream pumps in my tank, switch channel 1 & 2.

    I would like to program them to alternate whilst on, Stream pump group 1 (got them alternating etc)

    I’d like to have them come on and off at certain times during the day..... (timer 3)

    I therefore have 3 “zones” that need programming.
    1) Switch channel (1&2)
    2) Stream Pump Group 1
    3) Timer 3

    I cannot find out how to programme this, please help.......!

    Chris

  2. #2
    Join Date
    27.05.2015
    Posts
    2,488

    Default

    Chris,

    Are these pumps being controlled via the physical sockets on the powerbar or 1-10v?

  3. #3
    Join Date
    16.06.2020
    Location
    Kidderminster
    Posts
    3

    Default

    Quote Originally Posted by Vinny View Post
    Chris,

    Are these pumps being controlled via the physical sockets on the powerbar or 1-10v?
    Hi Vinny,

    Just using switch sockets not 1-10v.

    Regards

    Chris

  4. #4
    Join Date
    27.05.2015
    Posts
    2,488

    Default

    If you want both pumps to react to the same TIMER, give this a try:

    1. Create your timer function

    You will now create a Programmable Logic function which combines the TIMER function and the settings for the first stream pump...
    1. Go to the Programmable Logic settings page and select an unused gate
    2. Set the function to AND
    3. Set Input 1 to Stream pump (select first pump)
    4. Set Input 1 to Timer (select timer number)
    5. Save settings

    You will now create a Programmable Logic function which combines the TIMER function and the settings for the second pump...
    1. Go to the Programmable Logic settings page and select an unused gate
    2. Set the function to AND
    3. Set Input 1 to Stream pump (select second pump)
    4. Set Input 1 to Timer (select same timer number)
    5. Save settings

    You will now assign these PL functions to their respective outlets...
    1. Go to the Switch channels settings page and select the outlet powering your first pump
    2. Assign it to the function, Programmable Logic (choose the gate belonging to the 1st pump)
    3. Type-in description
    4. Select the outlet powering your second pump
    5. Assign it to the function, Programmable Logic (choose the gate belonging to the 2nd pump)
    6. Save settings

  5. #5
    Join Date
    16.06.2020
    Location
    Kidderminster
    Posts
    3

    Default

    hey Vinny, this has worked.... thanks a million! First class help!!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •