Hi

I have got the Tunze 6095 and the Tunze 1 cable. Now my Tunze is connected to Power bar S1 and the Tunze 1 cable is connected to L1/L2 port.

I want to achieve the following:
1. When I press on tile "Feed Pause 1" it should shut off my Tunze Wave Maker and the Return Pump connected to S2 in Power Bar.
2. I want to control the stream function through Stream 1 group throughout the day and night.

Now this is what my setup in GCC:
System >> Switch Channels and outlets >> S1 (Power bar) (Tunze is set to "Always On")
System >> 1-10V interface >> L1 - Function - set as Stream - 1

Processes >> Time 1 >> Number 1 starts at 8PM (All Days selected and Switch Mode is Manual). Setting for Dosing is manual 60ml/minute (i dont know what exactly this is for)

Extras >> Stream Group 1 >> Nocturnal enabled start at 11PM, end at 7AM
Mode - Random Min Duration 0:20:00 - Max duration 7:00:00
Waves - Sinus Waves - Min wave duration 5 second max 10 seconds
Random Wave reduction 80%

Pump Assignment - 1

Behavior during feed pause is set to "Off"
Reacts on Feedpause all selected 1,2,3,4

When I am selecting Feedpause tile in the App, the feedpause is activating in the PL4 and app, but the Tunze isnt stopping...

Please help.