Results 1 to 3 of 3

Thread: Help on ProfiLux 4 Touch Buttons

  1. #1
    Join Date
    15.05.2020
    Posts
    16

    Ausrufezeichen Help on ProfiLux 4 Touch Buttons

    Dear All

    Just unpacked and installed ProfiLux 4. All went fine with connections. However when I tried to go to the touch buttons and do the probe calibrations, I was taken aback as the touch buttons weren't working. Ok, so no problem . Searched net and followed the calibration video for touch buttons! But after that machine goes crazy. See attached video.

    https://youtu.be/PAyycb3ilmg

    Please please please help me.

    Thanks in advance.

  2. #2
    Join Date
    27.05.2015
    Posts
    2,483

    Default

    When you calibrated, did you press all 6 keys?
    These should be pressed one at a time as you would normally press them when you are using them.

    Is the controller plugged into a grounded outlet?
    Electrical interference can cause this kind of behavior too. Take the controller to a completely different room and try the calibration again.

  3. #3
    Join Date
    15.05.2020
    Posts
    16

    Ausrufezeichen

    Quote Originally Posted by Vinny View Post
    When you calibrated, did you press all 6 keys?
    These should be pressed one at a time as you would normally press them when you are using them.

    Is the controller plugged into a grounded outlet?
    Electrical interference can cause this kind of behavior too. Take the controller to a completely different room and try the calibration again.
    Hi Vinny

    Thank you so much for attending this.
    This is indeed in grounded connection and I have tested this with a socket tester. We are using also mandatory grounding plugs (like UK).
    I have touched all the buttons during my calibration. Kept the device completely not connected with power for sometimes as well before reconnecting.

    I will try connecting it to different room once again and check...
    Interesting is only the “cancel” button isn’t working when I touch now. Others work even though erratically.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •