Results 1 to 4 of 4

Thread: 2nd power Bar connexion?

  1. #1
    Join Date
    14.04.2020
    Posts
    6

    Default 2nd power Bar connexion?

    Hello,

    I bought a new Powerbar 6, I just would like to know how I can plug it? Do I need a cable? Do I link it to the Profilux4, or to the other Powerbar?

    thank you

  2. #2
    Join Date
    27.05.2015
    Posts
    2,488

    Default

    Hi there,

    If this is a Powerbar-6E, you can just connect this to the PAB port on the first PB-6E with a PAB-cable.

  3. #3
    Join Date
    14.04.2020
    Posts
    6

    Default

    Hello, thank you for this answer. I bought a cable (not a Profilux) it s à normal cable RJ45 for network but it does not work.

    I used the same cable from Profilux to slave dosing pump and they communicate but not this one....

    Do I have to use a special GHL cable or do I have to setup something? To power works but I cannot give them order... everything is off on the app but the current run ... so I think they do not communicate

    Thank you
    Pierre

  4. #4
    Join Date
    27.05.2015
    Posts
    2,488

    Default

    Hello Pierre,

    If this non-GHL cable is a straight through cable, it should work.
    Please try with the correct cable or GHL cable.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •