Zeige Ergebnis 1 bis 3 von 3

Thema: a little bit of help please

  1. #1
    Registriert seit
    23.06.2020
    Beiträge
    2

    Rotes Gesicht a little bit of help please

    Hi i have just recently set up my khd and had lots of problems just getting it too do a measure, it turns out i had put the wrong measurements into the director calculator i corrected that and managed to get a measure finally after 250ml of regent down the drain lol. my alk in tank is at 10 at the moment yes its high..
    the director gave a measure of 5dkh , i was really happy i had finally got a measurement and had a little dance of joy at that stage i had not added the inline filter measurement of 7ml for water sample which i have now done.. BUT this morning however as i did another measurement the director gave me 0.1 and another test 0.3 =/ anyway i was reading through other posts on the khd and noticed a post with

    ADC1 at ph4
    50119

    ADC2 at PH7
    29540

    this shocked me a bit as its the 2nd time iv calibrated the ph probe and my results are very different as below

    ADC1 at ph4
    4239

    ADC2 at ph7
    4236
    have i calibrated the probe wrong? what do other peoples readings show on these ??

    the other thing i have noticed is in diagnosis section where it says actual ph probe this has shown many different readings it was swinging around 1 , 3 ,2 , 4 , etc and even shows a few times this -2147 at the moment it has climbed to 22 ??? can anyone please shed some light on this for me or show me the way before i go through the entire bottle of regent any help is greatly appreciated !! thanx

  2. #2
    Registriert seit
    23.06.2020
    Beiträge
    2

    Standard

    Zitat Zitat von Guysmiley Beitrag anzeigen
    Hi i have just recently set up my khd and had lots of problems just getting it too do a measure, it turns out i had put the wrong measurements into the director calculator i corrected that and managed to get a measure finally after 250ml of regent down the drain lol. my alk in tank is at 10 at the moment yes its high..
    the director gave a measure of 5dkh , i was really happy i had finally got a measurement and had a little dance of joy at that stage i had not added the inline filter measurement of 7ml for water sample which i have now done.. BUT this morning however as i did another measurement the director gave me 0.1 and another test 0.3 =/ anyway i was reading through other posts on the khd and noticed a post with

    ADC1 at ph4
    50119

    ADC2 at PH7
    29540

    this shocked me a bit as its the 2nd time iv calibrated the ph probe and my results are very different as below

    ADC1 at ph4
    4239

    ADC2 at ph7
    4236
    have i calibrated the probe wrong? what do other peoples readings show on these ??

    the other thing i have noticed is in diagnosis section where it says actual ph probe this has shown many different readings it was swinging around 1 , 3 ,2 , 4 , etc and even shows a few times this -2147 at the moment it has climbed to 22 ??? can anyone please shed some light on this for me or show me the way before i go through the entire bottle of regent any help is greatly appreciated !! thanx
    thank you everyone its sorted now and running perfect =)

  3. #3
    Registriert seit
    27.05.2015
    Beiträge
    1.895

    Standard

    Excellent!

Forumregeln

  • Es ist dir nicht erlaubt, neue Themen zu verfassen.
  • Es ist dir nicht erlaubt, auf Beiträge zu antworten.
  • Es ist dir nicht erlaubt, Anhänge hochzuladen.
  • Es ist dir nicht erlaubt, deine Beiträge zu bearbeiten.
  •