Zeige Ergebnis 1 bis 4 von 4

Thema: LOGO show red on P¤ - no alarms

  1. #1
    Registriert seit
    24.01.2011
    Ort
    Bohus, Sweden
    Beiträge
    182

    Standard LOGO show red on P¤ - no alarms

    I noted something with my P4 the other dag. The Logo on the main unit (1809119065 and FW 7.24) is red - and no alarms. The Logos on my other units (3 doser 2.1, 1 doser 2 (SA use as a slave) and an exp box 2 are yellow . The settings is Standard w/o blinking

    Is this anything to be worried about?


    Sincerely Lasse

  2. #2
    Registriert seit
    12.04.2015
    Beiträge
    193

    Standard

    please try to switch the light to permanent green. perhaps the green leds are brooken.

  3. #3
    Registriert seit
    27.05.2015
    Beiträge
    1.895

    Standard

    Hello Lasse,

    If this problem continues, please open a support ticket so we can directly assist you.

  4. #4
    Registriert seit
    24.01.2011
    Ort
    Bohus, Sweden
    Beiträge
    182

    Standard

    All 3 basic LEDs (Red, Blue, Green) works as it should. However - I think that @Gandalf is on the right track but it have something with the intensity to do. I had this problem with the intensity set at 15 %. If I rise this to 100 % - the Logo on my P4 is yellow (standard without blinking) - at 59% is more orange and at 15 % - it is more red. All other Logos (Doser 2,x and ExpBox is yellow) With blinking - the P4 is blinking green - yellow or red (depending on intensity,) all the others yellow-yellow. The yellow warning is because one pump was without liquid. When I fill it up - all Logos are green again at standard mode without blinking. With standard mode - all units is blinking blue.

    I suppose I have a defect RGB LED in my P4 Logo - I can live with that. However @Vinny - if you think the problem can have a deeper impact (that my controller maybe do not work as it should with regulating issues) - I can come back with a support ticket

    Sincerely Lasse

Forumregeln

  • Es ist dir nicht erlaubt, neue Themen zu verfassen.
  • Es ist dir nicht erlaubt, auf Beiträge zu antworten.
  • Es ist dir nicht erlaubt, Anhänge hochzuladen.
  • Es ist dir nicht erlaubt, deine Beiträge zu bearbeiten.
  •