Results 1 to 2 of 2

Thread: Options to plug in new device to ProfiLux 4 once 2 PAB ports already in use

  1. #1
    Join Date
    31.03.2021
    Location
    Port Melbourne
    Posts
    11

    Default Options to plug in new device to ProfiLux 4 once 2 PAB ports already in use

    Hi GHL Support Community,

    I purchased a Ion Director that I received a few weeks ago.
    Today, as was planning to install it, I realised that I didn't have a PAB port available on my ProfiLux 4.
    Out of the 2 ports available on the ProfiLux, one port is used to control a Powerbar 6E and the second is used to monitor a slave KH Director.

    What are my options to plug in the Ion Director?
    i.e.: Can I plug the Ion Director PAB cable into a free slot of the KH Director Doser Slave to continue the chain of devices linked to the ProfiLux 4? (refer to attached picture for details of proposed devices chain)

    Any advise is appreciated, thank you!
    Attached Images Attached Images

  2. #2
    Join Date
    10.10.2013
    Posts
    994

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •