Zeige Ergebnis 1 bis 3 von 3

Thema: Cleaning of Mitras fixtures

  1. #1
    Registriert seit
    10.11.2012
    Ort
    Salamanca
    Beiträge
    53

    Standard Cleaning of Mitras fixtures

    After quite a time of running the fixtures the fans are noisier than they used to be. Is it recommended to open up the fixtures and clean the fans or is it better to clean them from the outside (blowing air, for instance)?

  2. #2
    Registriert seit
    27.05.2015
    Beiträge
    1.852

    Standard

    Depending on the extent of the dust inside the fixture, it would probably be more effective to open the fixture and use an can of compressed air to clean out the fans and heatsink fins.
    Once you remove the side cover, the top and bottom sheets slide out.

    P.S. - Just don't forget to unplug the light first.

  3. #3
    Registriert seit
    10.11.2012
    Ort
    Salamanca
    Beiträge
    53

    Standard

    Zitat Zitat von Vinny Beitrag anzeigen
    Depending on the extent of the dust inside the fixture, it would probably be more effective to open the fixture and use an can of compressed air to clean out the fans and heatsink fins.
    Once you remove the side cover, the top and bottom sheets slide out.

    P.S. - Just don't forget to unplug the light first.
    Thanks a lot Vinny. Actually I have to dismount the fixtures as now they are in two holding rails. I will not forget unplugging them LOL

Forumregeln

  • Es ist dir nicht erlaubt, neue Themen zu verfassen.
  • Es ist dir nicht erlaubt, auf Beiträge zu antworten.
  • Es ist dir nicht erlaubt, Anhänge hochzuladen.
  • Es ist dir nicht erlaubt, deine Beiträge zu bearbeiten.
  •