Results 1 to 10 of 10

Thread: Powerbar 5.1 - PAB PROBLEM

  1. #1
    Join Date
    03.03.2009
    Location
    alingsås
    Posts
    133

    Default Powerbar 5.1 - PAB PROBLEM

    Hello.
    I have a powerbar PAB that no longer works, has searched for it in the GHL computer. Its worked yesterday, has tried to change cable. Is it broken or can it be repaired?


  2. #2
    Join Date
    12.04.2015
    Posts
    364

    Default

    check the fuse and use the old cable again.

  3. #3
    Join Date
    03.03.2009
    Location
    alingsås
    Posts
    133

    Default

    The fuse is ok
    When i use the pAB kabel it alarm in the GHL computer and cant find the powerbar


    Skickat från min iPhone med Tapatalk

  4. #4
    Join Date
    27.05.2015
    Posts
    2,488

    Default

    If you recently attempted a PAB-device update for another device other than the PB5.1, but left the PB5.1 connected, that will cause this problem. The device received the wrong FW.
    Please follow the emergency PAB-device update steps as shown here:
    https://www.aquariumcomputer.com/kno...r-pab-devices/

  5. #5
    Join Date
    03.03.2009
    Location
    alingsås
    Posts
    133

    Default

    Quote Originally Posted by Vinny View Post
    If you recently attempted a PAB-device update for another device other than the PB5.1, but left the PB5.1 connected, that will cause this problem. The device received the wrong FW.
    Please follow the emergency PAB-device update steps as shown here:
    https://www.aquariumcomputer.com/kno...r-pab-devices/
    Hello
    No update at all in The system

    But if the pab dosent work, i cant do a update ??


    Skickat från min iPhone med Tapatalk

  6. #6
    Join Date
    27.05.2015
    Posts
    2,488

    Default

    Did you take a look at the steps?
    The answer to your question is there.

  7. #7
    Join Date
    03.03.2009
    Location
    alingsås
    Posts
    133

    Default

    Not yet i Will test as it says


    Skickat från min iPhone med Tapatalk

  8. #8
    Join Date
    03.03.2009
    Location
    alingsås
    Posts
    133

    Default Powerbar 5.1 - PAB PROBLEM

    [mention]Vinny [/mention]
    Hello now i have Done as it says in the text
    In the last step it says
    Error while transmitting firmwire.

    I have test the both PAB connection


    Skickat från min iPhone med Tapatalk
    Last edited by wrang; 24.05.2020 at 09:57.

  9. #9
    Join Date
    03.03.2009
    Location
    alingsås
    Posts
    133

    Default

    Now i get this error


    Skickat från min iPhone med Tapatalk

  10. #10
    Join Date
    27.05.2015
    Posts
    2,488

    Default

    Make sure you are connected over USB and choosing the "firmware update" button under the PAB-devices section.
    NOT the maintenance section.

    If issue continues, please open a support ticket and provide these details, screenshots, serial number of your PB and sales reciept.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •