Page 2 of 2 FirstFirst 12
Results 11 to 13 of 13

Thread: Doser gen 1 connect to profilux 3.1 n EX

  1. #11
    Join Date
    12.04.2015
    Posts
    364

    Default

    a normal rj12 should work. if you have a multimeter you can check all 6 pins of the cable. does your doser have a display on the top?
    and i still think you need to use the option with the digital power bar connektion.
    try to set the switch channels as always on. so you can see, there is a problem with the connectiion doser an p3 or with the configuration of the dosing pumps.

  2. #12
    Join Date
    09.05.2020
    Posts
    7

    Default

    Quote Originally Posted by Gandalf View Post
    a normal rj12 should work. if you have a multimeter you can check all 6 pins of the cable. does your doser have a display on the top?
    and i still think you need to use the option with the digital power bar connektion.
    try to set the switch channels as always on. so you can see, there is a problem with the connectiion doser an p3 or with the configuration of the dosing pumps.
    No it doesnt have a display on the top, its the slave unit.
    I purchased the console and the doser only no power bar though.

    But I found a second hand old style 6d the non pab on ebay which I will order.

    I will try to switch them to always on and I will advise.
    Many thanks again I appreciate :-)

  3. #13
    Join Date
    09.05.2020
    Posts
    7

    Default

    I think profilux doesn't talk to the doser. ����

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •