Zeige Ergebnis 1 bis 9 von 9

Thema: Multiple socket function for various feed pause

  1. #1
    Registriert seit
    01.11.2019
    Beiträge
    15

    Standard Multiple socket function for various feed pause

    Can anyone help me to do the below things ???

    FEED PAUSE 1 (7 min): FISH FEED

    OFF - RETURN PUMP,WAVEMAKERS,GYRE, SKIMMER & ATO

    SKIMMER &ATO SOCKETS SHOULBE ON AFTER 3 MIN ONCE FEED PAUSE 1 IS OVER..

    (I WAS SUCCESSFUL WITH THE ABOVE THINGS)

    FEED PAUSE 2 (10 min):

    OFF - RETURN PUMP,SKIMMER & ATO

    SKIMMER & ATO SOCKETS SHOULD BE ON AFTER 10 MIN ONCE FEED PAUSE 2 IS OVER.

    MAINTENANCE 1 (120 min):

    OFF - RETURN PUMP,GYRE, WAVEMAKERS & ATO

    SIMMER & ATO SHOULD BE ON AFTER 3 MINUTES ONCE MAINTENANCE 1 OVER.

    I NEED TO PROGRAM ABOVE THINGS..PLEASE HELP ME HOW TO DO IT.

    Socket details as follows,

    Socket 1 - Return Pump
    Socket 2 - Gyre
    Socket 3 - Wavemaker
    Socket 4 - Skimmer
    Socket 5 - ATO

    THANKS IN ADVANCE..


    Sent from my ONEPLUS A5000 using Tapatalk

  2. #2
    Registriert seit
    12.04.2015
    Beiträge
    168

    Standard

    Please try:
    Mainenance 1: 120 min, effekt Socket 1 off Socket 3 off.
    Feed Pause 1: 7 min
    Feed Pause 2: 10 min
    Programable Logiks:
    g1: Delay Filter 1 180 seconds
    g2: Delay Filter 2 600 seconds
    g3: not maintanance 1
    g4: Delay G3 180 seconds
    g5: Filter 1 and Filter 2
    g6: G5 and G4
    G7: G6 and ATO Fill up

    Sockets:
    Socket 1: G5
    Socket 2: Filter 1
    Socket 3: Filter 1
    Socket 4: G6
    Socket 5: G7

  3. #3
    Registriert seit
    01.11.2019
    Beiträge
    15

    Standard

    Zitat Zitat von Gandalf Beitrag anzeigen
    Please try:
    Mainenance 1: 120 min, effekt Socket 1 off Socket 3 off.
    Feed Pause 1: 7 min
    Feed Pause 2: 10 min
    Programable Logiks:
    g1: Delay Filter 1 180 seconds
    g2: Delay Filter 2 600 seconds
    g3: not maintanance 1
    g4: Delay G3 180 seconds
    g5: Filter 1 and Filter 2
    g6: G5 and G4
    G7: G6 and ATO Fill up

    Sockets:
    Socket 1: G5
    Socket 2: Filter 1
    Socket 3: Filter 1
    Socket 4: G6
    Socket 5: G7
    I tried..FP 1 and FP 2 not getting delayed ie instantly ATO and Skimmer getting ON

    Sent from my ONEPLUS A5000 using Tapatalk

  4. #4
    Registriert seit
    01.11.2019
    Beiträge
    15

    Standard

    Zitat Zitat von Gandalf Beitrag anzeigen
    Please try:
    Mainenance 1: 120 min, effekt Socket 1 off Socket 3 off.
    Feed Pause 1: 7 min
    Feed Pause 2: 10 min
    Programable Logiks:
    g1: Delay Filter 1 180 seconds
    g2: Delay Filter 2 600 seconds
    g3: not maintanance 1
    g4: Delay G3 180 seconds
    g5: Filter 1 and Filter 2
    g6: G5 and G4
    G7: G6 and ATO Fill up

    Sockets:
    Socket 1: G5
    Socket 2: Filter 1
    Socket 3: Filter 1
    Socket 4: G6
    Socket 5: G7
    Moreover, why we need to use Fil water only...I dont have any sensors for ATO..It's a external ATO so just we need to say the socket of ATO when to ON and when to OFF...

    If delay program works then it's totally working..thanks in advance..

    Sent from my ONEPLUS A5000 using Tapatalk

  5. #5
    Registriert seit
    01.11.2019
    Beiträge
    15

    Standard

    Zitat Zitat von Gandalf Beitrag anzeigen
    Please try:
    Mainenance 1: 120 min, effekt Socket 1 off Socket 3 off.
    Feed Pause 1: 7 min
    Feed Pause 2: 10 min
    Programable Logiks:
    g1: Delay Filter 1 180 seconds
    g2: Delay Filter 2 600 seconds
    g3: not maintanance 1
    g4: Delay G3 180 seconds
    g5: Filter 1 and Filter 2
    g6: G5 and G4
    G7: G6 and ATO Fill up

    Sockets:
    Socket 1: G5
    Socket 2: Filter 1
    Socket 3: Filter 1
    Socket 4: G6
    Socket 5: G7
    G6 should be G1 and G2

    Now its working perfectly..Thank you so much sir..thanks a ton..

    Sent from my ONEPLUS A5000 using Tapatalk

  6. #6
    Registriert seit
    12.04.2015
    Beiträge
    168

    Standard

    make sense, sorry my mistake.
    For the ATO you can use g6. i thougt it was a ato from ghl.

  7. #7
    Registriert seit
    01.11.2019
    Beiträge
    15

    Standard

    Zitat Zitat von Gandalf Beitrag anzeigen
    make sense, sorry my mistake.
    For the ATO you can use g6. i thougt it was a ato from ghl.
    Thank you so much..it's working...

    Sent from my ONEPLUS A5000 using Tapatalk

  8. #8
    Registriert seit
    12.04.2015
    Beiträge
    168

    Standard

    I looked at that again.
    It should now go for feeding breaks, but not for maintenance.
    Please change to:

    g8: G1 and G2
    G6: G4 and G8

  9. #9
    Registriert seit
    01.11.2019
    Beiträge
    15

    Standard

    Zitat Zitat von Gandalf Beitrag anzeigen
    I looked at that again.
    It should now go for feeding breaks, but not for maintenance.
    Please change to:

    g8: G1 and G2
    G6: G4 and G8
    Okay..I will..thank you so much sir

    Sent from my ONEPLUS A5000 using Tapatalk

Forumregeln

  • Es ist dir nicht erlaubt, neue Themen zu verfassen.
  • Es ist dir nicht erlaubt, auf Beiträge zu antworten.
  • Es ist dir nicht erlaubt, Anhänge hochzuladen.
  • Es ist dir nicht erlaubt, deine Beiträge zu bearbeiten.
  •