Results 1 to 2 of 2

Thread: PropellerControl 1-10v interface - new function parameter

  1. #1
    Join Date
    15.05.2010
    Location
    London
    Posts
    62

    Default PropellerControl 1-10v interface - new function parameter

    To use the PropellerBreeze and PropellerControl, you need to connect the plug to the GHL plug bar AND setup control of the PropellerControl via the 1-10v interface, only the combination of both gives the expected result (fans turning on at the expected time ).

    With the 1-10v interface to control the PropellerControl, why not provide a new "Function Parameter" of Cooling based on the Function of Temperature.
    Similar to how the switch channels works.

    This way, I don't have to hog a plug bar socket, when the 1-10v interface can control the fans entirely.
    It's a complete waste of a plug bar socket, seeing as I'm already programatically controlling the fan via the controller.

    To be absolutely clear, I'm suggesting a new function parameter called "cooling" be added to the 1-10v interface for the function Temperature.
    This would only output any voltage if the temperature required cooling (as per the plug bar socket logic).
    Last edited by kingy138; 14.04.2020 at 22:59.

  2. #2
    Join Date
    09.11.2017
    Posts
    1,476

    Default

    This is already possible. Therefor, check the programming guide point 5.15 and 8.4: https://www.aquariumcomputer.com/dow...g-guide-v7-02/

    You have to assign the temperature sensor as function to the 1-10V interface and set the '1-10V is max. at deviation' setting at the temp. sensor settings.
    No support or warranty issues over PM! Please send PMs to the moderators only if you have general problems with using the forum! Thanks for helping us to keep the support efficient.
    Kein Support oder Reklamationsabwicklung über PM! Bitte senden Sie an die Moderatoren nur PMs bei allgemeinen Problemen mit der Verwendung des Forums! Danke dass Sie uns dabei helfen, den Support effektiv zu gestalten.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •