Results 1 to 5 of 5

Thread: L port

  1. #1
    Join Date
    18.01.2019
    Posts
    29

    Default L port

    Hi ,can i connect level sensors to l port breakout box

  2. #2
    Join Date
    27.05.2015
    Posts
    2,488

    Default

    GHL level sensors are connected to the Green or Purple level ports on the controller.
    Bare wire float switches should be connected to the PLM-ADIN expansion card.

  3. #3
    Join Date
    18.01.2019
    Posts
    29

    Default

    Thanks

  4. #4
    Join Date
    18.01.2019
    Posts
    29

    Default

    How to physically connect to The plm -adin

  5. #5
    Join Date
    27.05.2015
    Posts
    2,488

    Default

    The ADIN card can be used with a breakout board like this one:
    https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

    The bare-wire float can then be connected to the BO board and controlled through the ProfiLux.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •