Results 1 to 7 of 7

Thread: Can't find energy options in GCC?

  1. #1
    Join Date
    27.04.2017
    Location
    Nyon, Switzerland
    Posts
    75

    Default Can't find energy options in GCC?

    I want to change the energy options on my five Mitras LX 7206s but I cannot find the energy option item in the GCC when I log into my Profilux 4.

    Where can I see these options (to change the energy balance)?

    Thanks!

    Laith

  2. #2
    Join Date
    27.05.2015
    Posts
    2,488

    Default

    Hi,

    As soon as you connect to the fixture, the option will be to the left, directly below the "Communications" option.

  3. #3
    Join Date
    27.04.2017
    Location
    Nyon, Switzerland
    Posts
    75

    Default

    This is what I see at the bottom of the list when I click on the illumination tab in the GCC (connected to the P4):
    no energy option.jpg

    There is no energy option...

    Does this mean that I have to connect to each Mitras individually one by one to change the power balancing?

  4. #4
    Join Date
    27.05.2015
    Posts
    2,488

    Default

    For the time being, yes.

  5. #5
    Join Date
    27.04.2017
    Location
    Nyon, Switzerland
    Posts
    75

    Default

    Ok, thanks Vinny!

  6. #6
    Join Date
    27.04.2017
    Location
    Nyon, Switzerland
    Posts
    75

    Default

    A follow up question:

    I want to boost the blue channels to 110%. I currently have the blues at 100% and red and green at 12% in the illumination channels.

    I can just change the blue channels power balancing to 110% and leave the red and green at 100% since they don't use anywhere near the 100%? Or do I have to lower the power usage of the red and green below 100% in order for the Mitras to use the leftover power for the 110% in the blues?

    Thanks!

  7. #7
    Join Date
    27.05.2015
    Posts
    2,488

    Default

    I posted the reply on your original thread.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •