Results 1 to 2 of 2

Thread: PAB 5.1 2 Sockets Not Powered

  1. #1
    Join Date
    13.02.2015
    Location
    Glenn Dale, MD
    Posts
    21

    Default PAB 5.1 2 Sockets Not Powered

    Hi,

    My Maxpect PHs ran dry, as my return pump failed after maintenance mode. I have 2 sockets that won’t power up unless in manual override. They are on different PABs, and get power from other sockets. On one 5.1 PAB, the large red reset light is toggling back and forth from left to right.

    Can’t find examples on the internet or in the manuals. What do I need to do?

  2. #2
    Join Date
    13.02.2015
    Location
    Glenn Dale, MD
    Posts
    21

    Default

    Fixed this with Vinny’s help. Removed the programming, unassigned the power strips, reassigned the power strips, and recreated the programming. One of the red lights on the on off button for a power switch toggles left to right or up and down depending on your orientation. Not sure if that means anything, but the other power strip doesn’t do this.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •