Results 1 to 8 of 8

Thread: I replaced a wifi network, and the wifi bulb disappeared

  1. #1
    Join Date
    18.01.2019
    Posts
    29

    Default I replaced a wifi network, and the wifi bulb disappeared

    I switched to an Internet network, can't connect to the new network, the light on the wifi device is turned off, even when I make a change to the software, the save doesn't turn on

  2. #2
    Join Date
    27.05.2015
    Posts
    2,488

    Default

    Depending on how you setup the P4 during initial setup, you may be able to access the controller by using your mobile device to connect to its hotspot signal. Once connected, you will be able to go to the NETWORK settings page and type-in the new network information. We have a video which shows you how to do that:



    Steps for getting the controller on your home network starts at 4:21

    The other option is to connect to the controller using GHL Control Center (USB):
    https://www.youtube.com/watch?v=NdMR070a41c
    Last edited by Vinny; 05.02.2020 at 15:58.

  3. #3
    Join Date
    18.01.2019
    Posts
    29

    Default

    Thanks for the reply, the problem is that the device itself has lost the wifi, and the wifi light is off, I know all the operating instructions but the device gets nothing,

  4. #4
    Join Date
    27.05.2015
    Posts
    2,488

    Default

    If the Wi-Fi light is still OFF, that means something in the Wi-Fi (Client) settings was entered incorrectly. Perhaps a white space or typo somewhere in the settings.
    Are you able to see the P4's hotspot signal and connect to it?

  5. #5
    Join Date
    18.01.2019
    Posts
    29

    Default

    No able to see the P4's hotspot signal

  6. #6
    Join Date
    27.05.2015
    Posts
    2,488

    Default

    Open a support ticket please.
    Provide us with screenshots of your current WiFi settings on the P4, both Client and Access Point. Also provide photos of your current network settings and WiFi module firmware.

  7. #7
    Join Date
    18.01.2019
    Posts
    29

    Default

    Thanks, how do I open the ticket
    It does not recognize my username or email

  8. #8
    Join Date
    27.05.2015
    Posts
    2,488

    Default

    On our website, under the support tab:
    https://www.aquariumcomputer.com/sup...ets-enquiries/

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •