Results 1 to 3 of 3

Thread: use dosing pump depending on the conduct censor

  1. #1
    Join Date
    10.03.2018
    Posts
    7

    Frage use dosing pump depending on the conduct censor

    Hi
    I'm trying make my dosing pump run on a schedule but only if the conduct censor under a certain level.

    I have tried:
    step 1 dosing pump react to a switch channel.
    step 2 set the assigned switch channel to manu. dosing and created my schedule
    step 3 set a programmable logic to "AND" input 1 "conduct increase" input 2 " Assigned timer"
    Have also tried set it to descrease and alarm.
    But what ever the conduct censor is reading. the dosing pump always start on the schedule in the timer.

    That am I during wrong?

    How do I get to not start dosing if conduct is at the desired level?
    Last edited by peter_b; 30.01.2020 at 11:26.

  2. #2
    Join Date
    09.11.2017
    Posts
    1,476

    Default

    Hi,

    you need to select the created programmable logic as function for the switch channel.
    If you still have problems, please send screenshots of your settings.
    No support or warranty issues over PM! Please send PMs to the moderators only if you have general problems with using the forum! Thanks for helping us to keep the support efficient.
    Kein Support oder Reklamationsabwicklung über PM! Bitte senden Sie an die Moderatoren nur PMs bei allgemeinen Problemen mit der Verwendung des Forums! Danke dass Sie uns dabei helfen, den Support effektiv zu gestalten.

  3. #3
    Join Date
    10.03.2018
    Posts
    7

    Default

    It look like that was the problem.
    I made the switch channel look direct to the Timer instead to the programmable logic.

    Thanks for you help

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •