Results 1 to 3 of 3

Thread: Operation mode controller

  1. #1
    Join Date
    14.10.2019
    Posts
    10

    Default Operation mode controller

    Hi, I want to setup Operation mode controller for my a temperature so when it's too hot it turn the fan on 1-10v depends on the temperature, but the problem is in L8 the voltage is -8v.
    Capture.PNG

  2. #2
    Join Date
    27.05.2015
    Posts
    2,488

    Default

    Have you tested the fan controller to see if it turns the fans ON when needed?
    You can check this by adjusting the nominal value of your temperature probe and saving settings.

  3. #3
    Join Date
    14.10.2019
    Posts
    10

    Default

    try it but fans not turn on. Try to measure the voltage output but no voltage.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •