Results 1 to 4 of 4

Thread: Gyre 150

  1. #1
    Join Date
    14.10.2019
    Posts
    10

    Default Gyre 150

    Hi, I would like to know if there a delay option?? What I want to do is to change the direction for my gyre 150 like in this post https://www.reef2reef.com/threads/gy...everse.347459/
    But the problem is it reverse in full power. A delay option to stop the pump before changing direction will be the best.

  2. #2
    Join Date
    04.11.2015
    Posts
    1,062

    Default

    Hi,

    this should be possible using the assigned pump in the Stream group and setting waves to sinus waves and longer wave duration.
    No support or warranty issues over PM! Please send PMs to the moderators only if you have general problems with using the forum! Thanks for helping us to keep the support efficient.
    Kein Support oder Reklamationsabwicklung über PM! Bitte senden Sie an die Moderatoren nur PMs bei allgemeinen Problemen mit der Verwendung des Forums! Danke dass Sie uns dabei helfen, den Support effektiv zu gestalten.

  3. #3
    Join Date
    14.10.2019
    Posts
    10

    Default

    Quote Originally Posted by MatthiasF View Post
    Hi,

    this should be possible using the assigned pump in the Stream group and setting waves to sinus waves and longer wave duration.
    It's what i'm doing right now sinus waves ramp up to max and ramp down to min before change direction but the problem to do this take 2 stream pump, 1 ramp up to max and ramp down to min then second stream pump change direction. the wave duration is set for stream pump 1 is 30 sec and stream pump 2 is 60 secs but I want the delay longer then that for me 30 secs is too fast. Second issues is it ramp up to max and ramp down right away, what I want to do is ramp up to max and stay at max for 2 mins and ramp down to min and change direction.

  4. #4
    Join Date
    04.11.2015
    Posts
    1,062

    Default

    Maximum durations for waves are 60 seconds in permanent mode, but there are modes for ebb-tide, which allows you to go longer.
    Perhaps this can fulfill your needs.

    Also have a look at this Knowledge Base-article, which describes in detail how ProfiLux makes waves:
    https://www.aquariumcomputer.com/kno...with-profilux/ <https://www.aquariumcomputer.com/knowledge-base/create-custom-wave-patterns-with-profilux/>
    No support or warranty issues over PM! Please send PMs to the moderators only if you have general problems with using the forum! Thanks for helping us to keep the support efficient.
    Kein Support oder Reklamationsabwicklung über PM! Bitte senden Sie an die Moderatoren nur PMs bei allgemeinen Problemen mit der Verwendung des Forums! Danke dass Sie uns dabei helfen, den Support effektiv zu gestalten.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •