Results 1 to 5 of 5

Thread: P4 Dashboard won't load via web browser

  1. #1
    Join Date
    01.06.2018
    Posts
    23

    Default P4 Dashboard won't load via web browser

    My P4 is accessible via the iPhone app GHL Connect, works fine. But when I try to connect on my home network through a web browser to the IP address of the P4, it never completely loads. I'm able to activate the menu on the side, but the data never loads.

    I attached a picture.

    I've tried a Mac computer with Safari web browser. And Windows computer with both Chrome and IE. Same issue on all.

    Screen Shot 2019-11-19 at 7.28.14 PM.png


    I'm on Firmware 7.23 and WiFi Firmeware 6741

  2. #2
    Join Date
    09.11.2017
    Posts
    1,476

    Default

    Please try updating to the latest webinterface and WiFi-module version: https://www.aquariumcomputer.com/dow...le-esp-update/
    No support or warranty issues over PM! Please send PMs to the moderators only if you have general problems with using the forum! Thanks for helping us to keep the support efficient.
    Kein Support oder Reklamationsabwicklung über PM! Bitte senden Sie an die Moderatoren nur PMs bei allgemeinen Problemen mit der Verwendung des Forums! Danke dass Sie uns dabei helfen, den Support effektiv zu gestalten.

  3. #3
    Join Date
    01.06.2018
    Posts
    23

    Default

    How do I update the webinterface if the web page never loads? I was able to update the WiFi module via USB updater tool, but still not able to access web interface.

  4. #4
    Join Date
    27.05.2015
    Posts
    2,488

    Default

    Since the existing web interface FW is quite outdated, you can do the update by using the same tool. This time, select "Reprogram Filesystem".
    That will update the web interface.

    Please note, you will have to re-enter your WiFi information into the P4 WiFi settings. I suggest taking a screenshot of those settings before proceeding.

    Once that is done, you will be able to load the web interface without issues. Any future updates will be doable using the interface itself instead of the Update Tool.

  5. #5
    Join Date
    01.06.2018
    Posts
    23

    Default

    Yes, that worked. Everything works now! Thank you very much!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •