Results 1 to 3 of 3

Thread: long cord ATO control

  1. #1
    Join Date
    18.11.2019
    Posts
    2

    Default long cord ATO control

    Hi, I want to switch my tunze ATO to a profilux control. My tank is 15m from my osmoser, and at the moment, my tunze ATO is running a wire to the osmoser with a 12v current to turn on the tunze 22Ov socket (which controls the osmoser).

    1/ I don't know if a 10v signal off the profilux can turn on and off the tunze socket instead, anyone know ?

    the alternative could be to use a GHL LF-ABOX but then :
    2/can the 1-10v signal travel 15 meters
    3/I can't see the LF-ABOX in the GHL shop, is it still produced/sold ?

    thanks all for your help.

  2. #2
    Join Date
    18.11.2019
    Posts
    2

    Default

    I suppose, I could always use one of the powerbar socket with a 12v wallwart in it to control the tunze socket; but if one of the 1-10v output can be used, I would prefer it

  3. #3
    Join Date
    27.05.2015
    Posts
    2,488

    Default

    Hello,

    The 1-10v is not designed to be used as a sole power source for other devices.
    I am not familiar with the Tunze osmolator pump. It would be best to contact Tunze and see if it is possible to connect a power plug to it for connecting directly to a Powerbar socket.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •