Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: Kh director stay on zero number

  1. #1
    Join Date
    12.11.2019
    Posts
    30

    Default Kh director stay on zero number

    Hey i am trying to measure but it still zero and the pump of the dirictor dont work, i tried to give it dirict 24 v and it work but at the measurement it dont work. I removed the filter from the tube also.


    Sent from my iPhone using Tapatalk

  2. #2
    Join Date
    12.11.2019
    Posts
    30

    Default

    Can that be because i haven’t Made calibration yet?


    Sent from my iPhone using Tapatalk

  3. #3
    Join Date
    09.11.2017
    Posts
    1,476

    Default

    Yes, you need to calibrate everything first.
    Please read the manual and if you have problems, check the FAQs first: https://www.aquariumcomputer.com/support/faqs/
    No support or warranty issues over PM! Please send PMs to the moderators only if you have general problems with using the forum! Thanks for helping us to keep the support efficient.
    Kein Support oder Reklamationsabwicklung über PM! Bitte senden Sie an die Moderatoren nur PMs bei allgemeinen Problemen mit der Verwendung des Forums! Danke dass Sie uns dabei helfen, den Support effektiv zu gestalten.

  4. #4
    Join Date
    12.11.2019
    Posts
    30

    Default

    I made calibration today and still have zero number during the measurement and also the pump of the kh director that mixes the liquids don’t work. And it finishes work with the error “titration takes too long”


    Sent from my iPhone using Tapatalk

  5. #5
    Join Date
    09.11.2017
    Posts
    1,476

    Default

    Quote Originally Posted by Hossam View Post
    and also the pump of the kh director that mixes the liquids don’t work.
    Which pump do you mean? The internal pump?
    Have you checked it with the diagnosis function?
    No support or warranty issues over PM! Please send PMs to the moderators only if you have general problems with using the forum! Thanks for helping us to keep the support efficient.
    Kein Support oder Reklamationsabwicklung über PM! Bitte senden Sie an die Moderatoren nur PMs bei allgemeinen Problemen mit der Verwendung des Forums! Danke dass Sie uns dabei helfen, den Support effektiv zu gestalten.

  6. #6
    Join Date
    12.11.2019
    Posts
    30

    Default

    I tried it dont make any noise


    Sent from my iPhone using Tapatalk

  7. #7
    Join Date
    12.11.2019
    Posts
    30

    Default




    Sent from my iPhone using Tapatalk

  8. #8
    Join Date
    12.11.2019
    Posts
    30

    Default

    This is what i see when i start measurement


    Sent from my iPhone using Tapatalk

  9. #9
    Join Date
    12.11.2019
    Posts
    30

    Default

    That what i see when it finish




    Sent from my iPhone using Tapatalk

  10. #10
    Join Date
    12.11.2019
    Posts
    30

    Default




    Sent from my iPhone using Tapatalk

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •