Results 1 to 4 of 4

Thread: Auto water change and ATO

  1. #1
    Join Date
    14.10.2019
    Posts
    10

    Default Auto water change and ATO

    Hi, I would like to know if we can control solenoid instead of using pump. What I want to do is controlling 12v solenoid for ATO and water change, can I controlling it with L1 or something else then the powerbar?? Thank you!

  2. #2
    Join Date
    27.05.2015
    Posts
    2,488

    Default

    The 1-10V channels are not designed to be used as an actual power source that a solenoid requires. If you wish you use a solenoid, it is possible when you connect it to a powerbar socket.

  3. #3
    Join Date
    14.10.2019
    Posts
    10

    Default

    My water change station is in my basement about 20m from my tank. Impossible to run a powerbar that far.

  4. #4
    Join Date
    27.05.2015
    Posts
    2,488

    Default

    You can have 100m distances between PAB devices. If you can run a PAB cable from the P4 to the basement, it is possible to make it work with a 2nd powerbar placed in the basement.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •