Results 1 to 4 of 4

Thread: ORP reading

  1. #1
    Join Date
    10.10.2017
    Posts
    3

    Default ORP reading

    Hi, I would like to use the profilux to measure ORP and control carbon dosing.
    For that I need to know it can read to between -300 and +300 mv ?
    Also would I be able to tell the doser to dose at a certain trheshold ( in APEX this is easy but I have profilux)

    any one who already have this done or can inform me on the range of the ORP probe ?

  2. #2
    Join Date
    27.05.2015
    Posts
    2,488

    Default

    Hi there,

    The range for the Redox probe is -300 to +600mV.
    This is mentioned on page 43 of the ProfiLux 4 Programming Guide.

    Yes, you can have the doser run based on a specified mV range.

  3. #3
    Join Date
    10.10.2017
    Posts
    3

    Default

    can I use this with the Redox controller in the Profilux 3 ?

  4. #4
    Join Date
    27.05.2015
    Posts
    2,488

    Default

    The ProfiLux 3 already has built-in redox control.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •