Zeige Ergebnis 1 bis 3 von 3

Thema: Refrigerator and heater direction to different temperatures

  1. #1
    Registriert seit
    18.01.2019
    Beiträge
    11

    Standard Refrigerator and heater direction to different temperatures

    Hello, I want to connect a heater and refrigerator but I do not want to stop the electricity to the refrigerator because I fear it will cause damage, ie a heater directed to 25 and a refrigerator directed to 23, there is a solution to that
    Thanks
    Yosi

  2. #2
    Registriert seit
    27.05.2015
    Beiträge
    1.596

    Standard

    Hello,

    Running the cooling and heating devices at the same time would be inefficient since they would counteract each other.
    If the concern is the possibility of frequent ON/OFF switching, we recommend using the Cooling difference feature.
    More information on this can be found on page 46 of the ProfiLux 4 Programming Guide.

  3. #3
    Registriert seit
    18.01.2019
    Beiträge
    11

    Standard

    I mean that I want ghl to control the heater, and for the refrigerator I want ghl to be used only as an emergency, ie with regard to cooling it will work with the refrigerator control, for example a heating turn on that is lower than 25 and switch off a refrigerator if the temperature is less than 23 ° C

Forumregeln

  • Es ist dir nicht erlaubt, neue Themen zu verfassen.
  • Es ist dir nicht erlaubt, auf Beiträge zu antworten.
  • Es ist dir nicht erlaubt, Anhänge hochzuladen.
  • Es ist dir nicht erlaubt, deine Beiträge zu bearbeiten.
  •