Results 1 to 7 of 7

Thread: Doser 2.1 wifi help

  1. #1
    Join Date
    01.10.2019
    Posts
    4

    Default Doser 2.1 wifi help

    I just bought a Doser 2.1 and cannot get it on my wifi network with the dozens of other things.

    I have reset to factory (GHL Control center -> extras -> default settings)
    I have updated to 1.35
    I have it set to client mode
    I have tried using DHCP
    I have tried setting the IP address statically
    I have tried both of my wifi networks
    I have tried all combinations of the options in the wifi settings
    I have power cycled it
    I can never ping it from any computer
    I have reset it again and left it in access point mode and tried to connect from my phone but get "incorrect password" for the Dosers wifi

    How do I get this thing on the network?

  2. #2
    Join Date
    27.05.2015
    Posts
    2,488

    Default

    When the doser was set to Access Point mode, were you able to see the GHL-DOSER hotspot signal on your phone or tablet?
    If yes, then the WiFi chip is working normally.

    Not being able to connect may be a result of a typo in the network name or password entered. These fields are case-sensitive. Check for any white-spaces too in the fields.

  3. #3
    Join Date
    27.05.2015
    Posts
    2,488

    Default

    Steps for setting up the doser with a Static IP can be seen here:

  4. #4
    Join Date
    01.10.2019
    Posts
    4

    Default

    Yes I can see the hot spot and I have verified all of the connection info. I have copied and pasted as well as typed by hand a number of times.

    Thanks for posting the doc, that was what I followed to attempt to config.

  5. #5
    Join Date
    01.10.2019
    Posts
    4

    Default

    Anyone?

  6. #6
    Join Date
    27.05.2015
    Posts
    2,488

    Default

    Please open a support ticket for further assistance.
    Include screenshots of your existing Doser WIFI settings and network settings.

  7. #7
    Join Date
    01.10.2019
    Posts
    4

    Default

    Ok. I did a few days ago. Will wait a bit more I guess

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •