Results 1 to 3 of 3

Thread: two mitras 6300 and one 6200HV

  1. #1
    Join Date
    02.05.2018
    Posts
    7

    Default two mitras 6300 and one 6200HV

    hello
    as the title said i have two mitras 6300 and one 6200HV controlled via profilux 3.1 tex through PLM-PWC card as slaves..

    most of the clusters are arranged the same.. but is there a way that i can control them differently to match each other.. or the onlt way is to change the clusters of the lx 6200..

    waiting for your help..

    thanks

  2. #2
    Join Date
    27.05.2015
    Posts
    2,488

    Default

    6300 and 6200 each use different LED configurations.

    To best match the spectrum, all fixtures should use the same cluster configuration.
    Otherwise, the 6200 should run separately from the 2x 6300. This individual light would run a separate schedule than the other 2 and would have a spectrum that matches the 6300 as closely as possible.

  3. #3
    Join Date
    02.05.2018
    Posts
    7

    Default

    ok.. thanks for your replay..

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •