Originally Posted by
Vinny
Hi,
Before attempting to connect over WiFi with GCC, you need to confirm that the green light at the front of the P4 is ON.
If yes, then that tells you the device is connected to your network.
Depending on how you setup the WiFi on the P4 (Auto or Static IP), you will need to tell GCC what IP address belongs to the P4. After creating that connection, restart GCC and try to connect.
If the green light is OFF, then the device is NOT on your network. In that case, you should check the WiFi information you typed into the P4 to make sure everything is correct.
Bookmarks