Profilux connection help please

[JasonMcK]

192.168.1.142 64:b9:e8:72:33:10 23:58:01
ANH-DEP-TRAI 192.168.1.116 00:22:41:c8:d9:72 23:56:41
khoi-df26a16ebd 192.168.1.102 00:04:5a:7b:bd:4d 23:46:31

Do you know what these 3 devises are?

[kvmn]

192.168.1.142 64:b9:e8:72:33:10 23:58:01
ANH-DEP-TRAI 192.168.1.116 00:22:41:c8:d9:72 23:56:41
khoi-df26a16ebd 192.168.1.102 00:04:5a:7b:bd:4d 23:46:31

192.168.1.142 is iphone
192.168.1.116 is ipod
192.168.1.102 is pc computer

[JasonMcK]

For Wireless
With Router WEP off
on the profilux have you inputed the information under WLAN
SSID is the Router name Defaut is Linksys
Do not select adhoc select the other one (sorry at work)
then input the IP you can use automatically but inputing one is better
How about 192.168.1.105
Then OK

OK so take a look at the router table again and you should now see another devise hooked up to your Router that would be the Profilux

Hardwired
are you saying you have a CAT5 cable from the Profilux to the Router?

[kvmn]

For Wireless
With Router WEP off
on the profilux have you inputed the information under WLAN
SSID is the Router name Defaut is Linksys
Do not select adhoc select the other one (sorry at work)
then input the IP you can use automatically but inputing one is better
How about 192.168.1.105
Then OK

OK so take a look at the router table again and you should now see another devise hooked up to your Router that would be the Profilux

Hardwired
are you saying you have a CAT5 cable from the Profilux to the Router?

here is what i did,,please let me know if i did it right?

start with ESC bottom
Extra- selected
Communication--selected
device address<1>=selected
Router funtion=yes or no? = No selected
Com1 serial or com2-wlan? == Com2 wlan selected
9600 Baud=selected
No action or Ip address or Defaults(w-lan) ? == Ip address selected
Obtain IP auto? yes or no ?== No selected
IP adress=192.168.1.105 selected
Ad-hoc connect? yes or no?= No selected
SSID of Wlan-LTRX-IBSS = selected
Save now? yes or no? == Yes selected
done
anything wrong?thanks

[kvmn]

Hardwired
are you saying you have a CAT5 cable from the Profilux to the Router?

no

i hare wire cat5 cable from my laptop to router because when i disable wireless security my lap top don't have internet

look like Profilux don't have fitting for cat5 cable like neptune controller

[kvmn]

i don't get this


For Wireless
With Router WEP off

[JasonMcK]

i don't get this


For Wireless
With Router WEP off

WEP is the security settings

[JasonMcK]

here is what i did,,please let me know if i did it right?

start with ESC bottom
Extra- selected
Communication--selected
device address<1>=selected
Router funtion=yes or no? = No selected
Com1 serial or com2-wlan? == Com2 wlan selected
9600 Baud=selected
No action or Ip address or Defaults(w-lan) ? == Ip address selected
Obtain IP auto? yes or no ?== No selected
IP adress=192.168.1.105 selected
Ad-hoc connect? yes or no?= No selected
SSID of Wlan-LTRX-IBSS = selected
Save now? yes or no? == Yes selected
done
anything wrong?thanks

Router funtion=yes or no? = No selected You should select Yes

[kvmn]

Router funtion=yes or no? = No selected You should select Yes

ok i did try again,,,YEs selected ,,,

still no connection

[kvmn]

WEP is the security settings

ok security mode is
selected WEB instead wpa personal but i loss internet connection if i select WEB so its back to WPA personal now,,