Results 1 to 10 of 21

Thread: Messdaten

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    04.02.2018
    Location
    Wesel
    Posts
    209

    Default Messdaten

    Hallo
    Habe heute Update gemacht 1.1.2.6 nun kann ich die Textdatei von den Sensoren nicht mehr lesen??
    Sieht so aus.

    ProfiLux Measurement file version 2.00
    [Source: Source ID; Name; Details; Unit]
    0; Sensor 1; 2; 0
    1; Sensor 2; 1; 0
    2; Sensor 3; 4; 0
    3; Sensor 4; 3; 0
    [Data: Unix time (UTC+0); Source ID; Details; Value 1; Value 2; Value 3; Value 4]

    LG Rolf

  2. #2
    Join Date
    04.02.2018
    Location
    Wesel
    Posts
    209

    Default

    Hallo
    Frage: hat keiner das Problem??
    Mach ich noch ein Update die BETA-Version 1.1.2.7 vieleicht geht es damit?
    LG Rolf
    Last edited by Altum52; 12.05.2019 at 21:37.

  3. #3
    Join Date
    26.01.2016
    Location
    Jena
    Posts
    206

    Default

    bei mir geht es.

  4. #4
    Join Date
    04.02.2018
    Location
    Wesel
    Posts
    209

    Default

    Hallo
    Seltsam, bei mir geht es nicht?
    Mit Version 1.1.2.4 ging es.
    Du hast die Version 1.1.2.6 drauf und Profilux 3 ??

    Datum;Zeit;pH-Wert 1[pH];Temperatur 1[°C];Leitwert(F) 1[uS];Redox 1[mV];
    03.03.2019;10:38:00;6,91pH;20,5°C;387uS;435mV;
    03.03.2019;11:39:00;6,73pH;21,1°C;393uS;467mV;
    03.03.2019;12:39:00;6,72pH;21,2°C;394uS;471mV;
    Last edited by Altum52; 13.05.2019 at 21:19.

  5. #5
    Join Date
    04.02.2018
    Location
    Wesel
    Posts
    209

    Default

    Hallo
    Hat alles nichts gebracht,bleibt mir nur noch die Werkseinstellung.
    LG Rolf

  6. #6
    Join Date
    26.01.2016
    Location
    Jena
    Posts
    206

    Default

    Quote Originally Posted by Altum52 View Post
    Hallo
    Seltsam, bei mir geht es nicht?
    Mit Version 1.1.2.4 ging es.
    Du hast die Version 1.1.2.6 drauf und Profilux 3 ??

    Datum;Zeit;pH-Wert 1[pH];Temperatur 1[°C];Leitwert(F) 1[uS];Redox 1[mV];
    03.03.2019;10:38:00;6,91pH;20,5°C;387uS;435mV;
    03.03.2019;11:39:00;6,73pH;21,1°C;393uS;467mV;
    03.03.2019;12:39:00;6,72pH;21,2°C;394uS;471mV;

    genau abe der PL3 hat noch die alte Firmware, date nur up wenn es unbedingt notwendig ist.

  7. #7
    Join Date
    04.02.2018
    Location
    Wesel
    Posts
    209

    Default

    Hallo
    Wie meinst du das?
    LG Rolf

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •