Zeige Ergebnis 1 bis 3 von 3

Thema: Programming Skimmer to delay after pump is off and on

  1. #1
    Registriert seit
    02.05.2019
    Beiträge
    5

    Standard Programming Skimmer to delay after pump is off and on

    Hi,

    I have been playing around with programmable logic to get skimmer delay after the stream pump but still can not get it to work. The followings are my desired outcome:

    1/ Skimmer is delayed 10 mins after a power cut: this can be set up by Blackout - Delay

    2/ Both Skimmer and Stream pump is turned off during maintenance 1 for 20 mins. I have done this in the maintenance function. When the maintenance finished, i want to delay the skimmer 10 mins after the Stream pump is turned on to prevent skimmer overflow

    3/ Both Skimmer and Stream Pump is turn off during feed mode. When Stream pump is on again, Skimmer is delayed by 10 minutes

    4/ When manual override power socket, I want to set it whenever i turn off power socket 1 (stream pump), the power socket 2 is off (skimmer). When i turn on the socket 1, socket 2 will be delayed for 10 minutes

    So in other words, I would love to see the skimmer is off when stream pump is off, and on after 10 minutes the pump is on.

    Thanks so much for your help,


  2. #2
    Registriert seit
    12.04.2015
    Beiträge
    77

    Standard

    please try this:
    Power plug of the Skimmer ist set to P1
    P1 = P2 and P4
    P2 = not P3
    P3 = Pulse Maintenance 1 30 minutes
    P4 = not P5
    P5 = Pulse P6 (time of feed mode + delay)
    P6 = not Filter 1

  3. #3
    Registriert seit
    02.05.2019
    Beiträge
    5

    Standard

    Zitat Zitat von Gandalf Beitrag anzeigen
    please try this:
    Power plug of the Skimmer ist set to P1
    P1 = P2 and P4
    P2 = not P3
    P3 = Pulse Maintenance 1 30 minutes
    P4 = not P5
    P5 = Pulse P6 (time of feed mode + delay)
    P6 = not Filter 1
    Hi Gandalf,

    Thanks for your help. I made a modification from your recommendation and it works just fine:

    P1 = P2 and P4
    P2 = not P3
    P3 = Delay-on Maintenance 1 10 minutes
    P4 = not P5
    P5 = Delay-off P6 10 minutes
    P6 = Not Filter 1

    Although the programming works just fine now, i am a bit confused why "P5 = Delay off P6" is working. When i changed it to "P5= Delay on P6", the delay happen when the Filter is on. When filter is off, the socket return immediately
    Geändert von reefrite (11.05.2019 um 11:27 Uhr)

Forumregeln

  • Es ist dir nicht erlaubt, neue Themen zu verfassen.
  • Es ist dir nicht erlaubt, auf Beiträge zu antworten.
  • Es ist dir nicht erlaubt, Anhänge hochzuladen.
  • Es ist dir nicht erlaubt, deine Beiträge zu bearbeiten.
  •