Zeige Ergebnis 1 bis 7 von 7

Thema: KH Director reading is variable

  1. #1
    Registriert seit
    27.07.2012
    Beiträge
    68

    Standard KH Director reading is variable

    Hi all,

    I am having problems with the reading from my KH director.

    I have recalibrated the pumps multiple times, and have also recalibrated the ph probe multiple times.

    Have also flushed unit, vented regent etc. The regent tube is well under 70cm.

    The readings are consistently variable, Salifert reading is consistently 7.7;

    When I finish the sample pump calibration, KH Director reading is 7.7, but once its readings changed into 8.3, after I recalibrated the sample pump, the reading returned to 7.7. Sometime its reading changed into 7.4 or more low. I need often recalibrated the sample pump, so that I get the right reading.

    Basically I need to check the sample pump every three days so that I can guarantee that the reading is correct. What should I do?

    By the way, I have 2 units GHL Doser 2.1, I changed the Dosers, but the issue still stand here.
    Geändert von ss162400 (29.04.2019 um 14:10 Uhr)

  2. #2
    Registriert seit
    27.07.2012
    Beiträge
    68

    Standard

    From the perspective of high-speed performance, Maxi must be better than Doser 2.1, but which one is more stable at high speed? If they are consistent, or MAXI is better. I think I can buy another MAXI to improve my current predicament. Which expert can tell me the actual situation? Thank you!
    Geändert von ss162400 (30.04.2019 um 14:14 Uhr)

  3. #3
    Registriert seit
    09.11.2017
    Beiträge
    563

    Standard

    The dosing amount is stable on both Doser versions. But the Doser maxi can't be used for the KH Director, because it's dosing amount is too much for the KHD.

    Is the KHD measuring 7.7 dKH at the first measurement after calibrating only and the measures 8.3 at each measurement?
    You're sure that the measurement cell is empty before every measurement?
    No support or warranty issues over PM! Please send PMs to the moderators only if you have general problems with using the forum! Thanks for helping us to keep the support efficient.
    Kein Support oder Reklamationsabwicklung über PM! Bitte senden Sie an die Moderatoren nur PMs bei allgemeinen Problemen mit der Verwendung des Forums! Danke dass Sie uns dabei helfen, den Support effektiv zu gestalten.

  4. #4
    Registriert seit
    26.01.2016
    Ort
    Jena
    Beiträge
    40

    Standard

    hello.-)
    today i check my khd with the dkH reference and it is 7,5 and the second messuring is 7.6. i calibrate the pumps and ph on the 1st of march.
    great system.

  5. #5
    Registriert seit
    27.07.2012
    Beiträge
    68

    Standard

    Zitat Zitat von Thilo Beitrag anzeigen
    The dosing amount is stable on both Doser versions. But the Doser maxi can't be used for the KH Director, because it's dosing amount is too much for the KHD.

    Is the KHD measuring 7.7 dKH at the first measurement after calibrating only and the measures 8.3 at each measurement?
    You're sure that the measurement cell is empty before every measurement?
    Hi Thilo,

    Thanks for your timely reply! I am sorry for my late reply.

    The KHD measuring reading is 7.7 dKH at the first measurement after calibrating only and Salifert reading also is consistently 7.7dKH.
    but the measureing is variable rather than 8.3 dKH at each measurement. sometime it is 8.3 or 7.4 dKH, which is not the definite measurement reading after a few days

    I clearly saw that the measurement cell is empty before every measurement.

    Every few days, I need the calibrating to be sure the measuring reading is right. I am very confuse.

    At once I bought a new GHL Doser 2.1 Pumps Maintenance Set to solve the issue, but the problem remains.

    I think the unstable output of Doser 2.1 pump causes the result.

  6. #6
    Registriert seit
    09.11.2017
    Beiträge
    563

    Standard

    Hi,

    to solve this issue, I think it would be best to continue in our ticket system: https://www.aquariumcomputer.com/sup...kets-enquiries
    No support or warranty issues over PM! Please send PMs to the moderators only if you have general problems with using the forum! Thanks for helping us to keep the support efficient.
    Kein Support oder Reklamationsabwicklung über PM! Bitte senden Sie an die Moderatoren nur PMs bei allgemeinen Problemen mit der Verwendung des Forums! Danke dass Sie uns dabei helfen, den Support effektiv zu gestalten.

  7. #7
    Registriert seit
    27.07.2012
    Beiträge
    68

    Standard

    Zitat Zitat von Thilo Beitrag anzeigen
    Hi,

    to solve this issue, I think it would be best to continue in our ticket system: https://www.aquariumcomputer.com/sup...kets-enquiries
    I have submit my ticket, and Ticket #596。

Forumregeln

  • Es ist dir nicht erlaubt, neue Themen zu verfassen.
  • Es ist dir nicht erlaubt, auf Beiträge zu antworten.
  • Es ist dir nicht erlaubt, Anhänge hochzuladen.
  • Es ist dir nicht erlaubt, deine Beiträge zu bearbeiten.
  •