Results 1 to 10 of 14

Thread: S-L-port BOB

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    09.01.2019
    Posts
    7

    Default S-L-port BOB

    Hi,

    I've connected the profilux S port via a S-L port BOB to 4 relays. I tried to assign switch channels to the relays, with the ' Program digital powerbar ' button on the ' switch channels and outlets' page in GCC.
    This does not work, I can't get the relay controlled.
    Is there another way I should be doing this?

    Thanks for the help!

  2. #2
    Join Date
    27.05.2015
    Posts
    2,488

    Default

    Hi there,

    Exactly what device do you have connected to the S/L breakout box?
    Which ProfiLux controller do you have? P4 or P4e?

  3. #3
    Join Date
    09.01.2019
    Posts
    7

    Default

    Hi,

    I have the P4, and the relay is a 12V 4 Channel Relay Module Board Shield with Optocoupler Road High and Low Level Trigger Relay for Arduino. With the relay I want to control solenoid valves and ATO pumps.

  4. #4
    Join Date
    13.08.2010
    Posts
    4,150

    Default

    Remember that the S- interfaces tolerate max. 10mA.

    regards pit

  5. #5
    Join Date
    09.01.2019
    Posts
    7

    Default

    relay.jpg

    this is the relay, should work or not?

  6. #6
    Join Date
    13.08.2010
    Posts
    4,150

    Default

    I don't know how much mA need the board

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •