Results 1 to 2 of 2

Thread: 2 level sensors in my fresh water tank

  1. #1
    Join Date
    18.09.2013
    Posts
    51

    Default 2 level sensors in my fresh water tank

    Hi, I would appreciate some help in order to reach the following configuration:

    I have 2 level sensors in my fresh water tank:
    - first one is on the top of the tank (tank is full)
    - second one is on the bottom (tank is empty)

    What I want is that osmosis is activated only when the second level triggers (ie when the tank is empty). And off course cut when the first one say that the tank is full.
    It means that the first one should not trigger the osmosis alone. To have the osmosis works, it means that both levels should be on. However only the first one will off the osmosis.
    Is it possible to get that?
    Thanks!

    Christophe

  2. #2
    Join Date
    27.05.2015
    Posts
    2,486

    Default

    Hello Christophe,

    You can accomplish this by using the Min/Max level sensor function.

    See our ATO setup how-to video here:

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •