Zeige Ergebnis 1 bis 4 von 4

Thema: myGHL cloud based power/connectivity monitoring

  1. #1
    Registriert seit
    03.03.2019
    Beiträge
    7

    Standard myGHL cloud based power/connectivity monitoring

    I accidentally unplugged the power cord that powers my reef (everything!) this morning...it came loose when I opened the curtains and I noticed the gurgling sound of the return pumps shutting down. That got me thinking.

    Does the myGHL cloud service actively monitor if my P4 is online? If so, how do I trigger alarms using it?

  2. #2
    Registriert seit
    04.11.2015
    Beiträge
    848

    Standard

    No, myGHL acts as a proxy and is not meant for monitoring actively.
    For 'normal' power loss, use the power-cut feature from the P4 maintenance actions and an external battery, in order to keep it running and alarm you.
    No support or warranty issues over PM! Please send PMs to the moderators only if you have general problems with using the forum! Thanks for helping us to keep the support efficient.
    Kein Support oder Reklamationsabwicklung über PM! Bitte senden Sie an die Moderatoren nur PMs bei allgemeinen Problemen mit der Verwendung des Forums! Danke dass Sie uns dabei helfen, den Support effektiv zu gestalten.

  3. #3
    Registriert seit
    27.05.2015
    Beiträge
    1.573

    Standard

    As mentioned above, the P4 does include a power-loss monitor feature, but requires a backup power source to keep the vital equipment running.

    Within the P4 you can also configure the default states of each powerbar outlet. For example, if a powerbar looses communication with the P4, you can still have these outlets stay ON. This feature can be found in the SYSTEM settings page. Select your Powerbar and click CONFIGURE.

  4. #4
    Registriert seit
    03.03.2019
    Beiträge
    7

    Standard

    Zitat Zitat von Vinny Beitrag anzeigen
    As mentioned above, the P4 does include a power-loss monitor feature, but requires a backup power source to keep the vital equipment running.

    Within the P4 you can also configure the default states of each powerbar outlet. For example, if a powerbar looses communication with the P4, you can still have these outlets stay ON. This feature can be found in the SYSTEM settings page. Select your Powerbar and click CONFIGURE.
    Thanks. I'll go double check that my power outage settings are appropriate but I don't have a battery backup solution

Forumregeln

  • Es ist dir nicht erlaubt, neue Themen zu verfassen.
  • Es ist dir nicht erlaubt, auf Beiträge zu antworten.
  • Es ist dir nicht erlaubt, Anhänge hochzuladen.
  • Es ist dir nicht erlaubt, deine Beiträge zu bearbeiten.
  •