Page 4 of 4 FirstFirst ... 234
Results 31 to 35 of 35

Thread: ION Director - measuring Ca + Mg

  1. #31
    Join Date
    08.07.2019
    Posts
    61

    Default

    Quote Originally Posted by Mark hikin View Post
    With the ion director, using the sa 2.1 doser , will it also dose ca and mg with just the 1 sa 2.1 doser , how many pumps will.the ion director use
    The Ion uses all 4 heads for sampling and testing. If you want to dose you will need an additional doser.
    1. Water sample
    2. Cal fluid A
    3. Cal fluid B
    4. Drain

  2. #32
    Join Date
    29.10.2018
    Location
    Bonnyrigg
    Posts
    4

    Default

    Quote Originally Posted by AZfishkeeper View Post
    The Ion uses all 4 heads for sampling and testing. If you want to dose you will need an additional doser.
    1. Water sample
    2. Cal fluid A
    3. Cal fluid B
    4. Drain
    Hi I would like to ask , I have the kh director and a doser2 sa connected to it , I also have a doser sa 2.1 , I want to get a ion director, can I connect it to the kh director or would I need to buy another slave doser to dose ca and mg .

  3. #33
    Join Date
    05.11.2017
    Posts
    22

    Default

    Quote Originally Posted by Mark hikin View Post
    Hi I would like to ask , I have the kh director and a doser2 sa connected to it , I also have a doser sa 2.1 , I want to get a ion director, can I connect it to the kh director or would I need to buy another slave doser to dose ca and mg .
    The kh director uses 3 heads. The Ion uses 4 heads.

    You would need additional heads if you want to dose on top of that.

    Sent from my SM-G950W using Tapatalk

  4. #34
    Join Date
    10.11.2012
    Location
    Salamanca
    Posts
    61

    Default

    Related to these questions. If I want to dose Ca and Mg in a way regulated by the Ion Director, do I need a new doser 2.0 or 2.1, or the old generation dosers are OK?

  5. #35
    Join Date
    09.11.2017
    Posts
    1,476

    Default

    This will also be possible with the old slave dosing units, since you can set a dosing pump as a switch channel function.
    No support or warranty issues over PM! Please send PMs to the moderators only if you have general problems with using the forum! Thanks for helping us to keep the support efficient.
    Kein Support oder Reklamationsabwicklung über PM! Bitte senden Sie an die Moderatoren nur PMs bei allgemeinen Problemen mit der Verwendung des Forums! Danke dass Sie uns dabei helfen, den Support effektiv zu gestalten.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •