Results 1 to 4 of 4

Thread: four LX 7206 blinking issue

  1. #1
    Join Date
    25.08.2018
    Posts
    18

    Frage four LX 7206 blinking issue

    After set one of the LX7206 as master and rest of them as slave, the lights are synchronized. But I found the four lights have random blinking at the same time in often ways(every 10 minutes).

    Can you help me here? Thanks.

    Ps, all lights has 1.08 firmware and I already made some swap between master and slave. still same problem.

  2. #2
    Join Date
    27.05.2015
    Posts
    2,486

    Default

    Do you have any simulation features enabled?
    What is the address numbering you assigned to each light?

  3. #3
    Join Date
    25.08.2018
    Posts
    18

    Default

    no, I don't have any simulation feature enabled.
    Where I can check these address numbering? I think LX7206 use zigbee protocol to manage the master/slave communication.

    PS, all lights wifi is disabled. I config lights with PC+USB only.

  4. #4
    Join Date
    27.05.2015
    Posts
    2,486

    Default

    When you connect, go to the general settings page and look close to the bottom of the page. The channel and address numbering will be next to the Master/Slave/Standalone options.
    What are the channel and address assignments of each LX7?

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •