Results 1 to 7 of 7

Thread: Can the Mitras LX7 be beconnected with P3.1 or P4?

  1. #1
    Join Date
    17.01.2016
    Posts
    23

    Default Can the Mitras LX7 be beconnected with P3.1 or P4?

    I just bought a Mitras LX7. Can it be connected with my P3.1 ? I hope the light could be linked with pumps so I can control it when I do a water change or other maintenance. My p3.1 has login my home LAN already.
    How can I do?

  2. #2
    Join Date
    12.04.2015
    Posts
    364

    Default

    You need a w-lan card for your p3

  3. #3
    Join Date
    13.08.2010
    Posts
    4,150

    Default

    w-lan card for PL3?? you need a PLM-PWC interface

    regards Pit

  4. #4
    Join Date
    17.01.2016
    Posts
    23

    Default

    Thank you very much, I'll try it. There was less information about the card on the official website, If I put the card in my P3, Will there be an setup menu add on GCC automatically?

  5. #5
    Join Date
    17.01.2016
    Posts
    23

    Default

    By the way, If I upgrade my P3 to P4, Do I need the PLM-PWC card too?

  6. #6
    Join Date
    27.05.2015
    Posts
    2,488

    Default

    The PLM-PWC card can be used on both the P3 and P4. Both controllers require it if you want to have the ProfiLux control your LX7.

    When you install the card, you should assign all LX7s as slave as the ProfiLux now becomes the master device.
    Set each light to a separate address.

    For example:
    • ProfiLux - Address 1
    • LX7 slave #1 - Address 2
    • LX7 slave #2 - Address 3
    • etc. etc...


    Creating a light schedule would now be done using the ProfiLux's Light Composer feature.

  7. #7
    Join Date
    17.01.2016
    Posts
    23

    Default

    Thanks.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •